Workstation configuration

From IridiaWiki
Jump to navigationJump to search

Network configuration

You should get a static IP from the system administrator. Your hostname will be the name of a famous scientist and the domain is ulb.ac.be. Other relevant addresses are:

Description IP address

Gateway

164.15.10.254

DNS1

164.15.59.200

You might also need to add the following data, althoug many systems set it automatically:

Description Value

Network

164.15.10.0

Netmask

255.255.255.0

Broadcast

164.15.10.255


Wi-Fi network configuration

At IRIDIA lab there are two wireless networks. To join any of them you should get the password from the system administrator. Relevant configuration data are:

Description Value
Network name Hashmal
Radio mode 802.11b/g Compatible
Channel 4
Wireless Security Mode 128bit WEP/WPA/WPA2
DNS Server 164.15.59.200


Description Value
Network name sbot
Radio mode 802.11b/g Compatible
Channel 6
Wireless Security Mode 128bit WEP
DNS Server 164.15.59.200
Distributed IPs IPs are provided through DHCP from iridia.ulb.ac.be

Firewall configuration

Since the computers are available through direct connections from internet you should protect your machine with a firewall. Linux provides an integrated mechanism for accepting or rejecting incoming packets.

If you want to setup a good firewall quickly, you may use the following link : Firewall script generator


How to generate the firewall script ?


Usually, the interface to internet is eth0. You can check your available interfaces by typing (as root) :

# ifconfig -a

Most of the time, you wish to have an access to the computer, but you still want it to be secure. The best is to disable any inbound service except SSH. The SSH connections are encrypted so that you can safely access to the computer even if someone is tcpdumping your connection.

For the moment, I don't know how to use the Fireparse format. If you know about it just use it. Otherwise you'll have to take a look at the logs (/var/log/syslog) to monitor the possible network problems or attacks.

Now that you have all the necessary informations, you can generate the firewall script. Name this script iptables, give it execution rights (chmod u+x iptables) and put it under the directory /etc/init.d/.

Be aware that the script loads some iptables modules in your kernel. If you have recompiled your kernel then you should ensure that the necessary modules are present. If you have statically linked the code to the kernel then you should remove the modprobe commands in the firewall's script.

Now simply add a symbolic link in the runlevel 2 to this script by typing (as root) :

# ln -s /etc/rc2.d/S12iptables /etc/init.d/iptables


You should adapt the number 12 to your needs. The firewall must be run as early as possible. For example if telnet services are run before it, an attack is still possible. Be careful about this.

If you want to understand more deeply iptables, you can check the following URLs :

Iptables official website

Iptables tutorial and explanations

Setting up a firewall using iptables (in french)


Printer configuration

All three printers at IRIDIA (see table "General Information") can be installed as "network printers" on your operating system (Ubuntu 8.10, Mac OS X, Windows XP). On Windows XP, please install the driver before setting up a network printer. On *nix-like systems (including Mac OS X), the most convenient option is to install the printers using the LPD/LPR printing protocol using the drivers provided in the table "Drivers" (whereby Mac OS X normally comes with these drivers pre-installed). These drivers also support some additional (hardware) features installed on the printers as listed in the table "Installable Options".

General Information

Name URL Model Location

Gutenberg

gutenberg.ulb.ac.be

HP4100

Office C.5.106A

Meucci

meucci.ulb.ac.be

Ricoh Aficio 1027

Office C.5.106A

Sabin

sabin.ulb.ac.be

Ricoh Aficio mp161 spf

Office C.5.106A


Drivers

Name *nix Windows XP

Gutenberg

HP_LaserJet_4100_Series.ppd

Suresupply_2_2_0_0000_usen.zip (x32 and x64 Edition)

Meucci

Ricoh-Aficio_1027_PXL.ppd

R31573en.zip | x64 Edition and various others here

Sabin

Ricoh-Aficio_MP_161_PXL.ppd

R23624en.zip | x64 Edition and various others here


Installable Options

Name Options

Gutenberg

  • Tray 3: Installed
  • Duplex Unit: Installed
  • Printer Hard Disk: Ram Disk
  • Total Memory: 32 - 63MB

Meucci

  • Shift Tray: Installed
  • Duplex Unit: Installed
  • Bypass Tray: Installed

Sabin

  • Lower Paper Tray: Installed

The IRIDIA and the ULB network

The IRIDIA system administrator can create an account on the local subnet for you, however, if you want to have access to some of the computer services of the university, you'll need an account on the university network as well. Ask the secretary for the forms and the process.


Mail configuration

Assuming that you have an account on both the local and the university network the mail settings are as follows:

Service URL

SMTP

smtp.ulb.ac.be

Iridia POP

iridia.ulb.ac.be

Iridia IMAP

iridia.ulb.ac.be

ULB POP

pop.ulb.ac.be

ULB IMAP

pop.ulb.ac.be

The SMTP server does not require authentication. The POP and IMAP services of ULB accept unsecure connections (no SSL). The POP and IMAP servers of Iridia require secure connections (with SSL).

There are also web interfaces available to read the email if you can not connect to the above servers via POP or IMAP:

SERVER URL

ULB

https://wwwdev.ulb.ac.be/webmail2/webmail.php

IRIDIA

https://iridia.ulb.ac.be/squirrelmail/


See also

Software HOWTOs


For Mac OS X users

In order to help Mac OS X users staying updated for what concerne security issues with their systems we suggest to subscribe to the following mailing list:

Security-announce -- product security notifications and announcements from Apple


Mac OS X Software to setup your research environment

Here you can find a list of softwares that you might want to check out:

  • LaTeX & BibTeX

MacTeX.dmg package - Easy-to-Install Package, which contains a complete and up to date TeX system from Gerben Weirda's gwTeX redistribution; Free

Textmate - editor (and much more); Commercial

TeXniscope - DVI/PDF previewer (synchronization with external editors (e.g. Emacs) both for DVI/PDF files); Free, sources available


  • Statistical analysis

R.app - Cocoa-based GUI for R; Free, GPL


  • Secure Shell

MacFUSE - a FUSE-Compliant File System Implementation Mechanism; Free, BSD-licence

MacFusion - a GUI for MacFUSE; Free, APSL-licence


  • Version Control System

(QuickTime movie with introduction to Subversion)

svnX - a GUI for Subversion; Free, GPL

Versions - Mac Subversion client; Commercial

Project management on Mac OS X

Merlin 2 Commercial (Review of the program by MacResearch.org)