IRIDIA cluster installing the diskless nodes
This section is on how to install the diskless nodes from scratch. That includes setting the server up so that serves the diskless nodes. If you are simply adding a new node, then many of the steps described on this page are not necessary.
Let's get started.
Installing a new diskless image
Install the package called diskless on majorana:
apt-get install diskless
This packages contain tools and binaries for a Debian image for the diskless nodes.
Before you can create the diskless image, you first have to create some basic files (base.tgz):
mkdir /tmp/diskless mkdir /var/lib/diskless mkdir /var/lib/diskless/default diskless-createbasetgz /tmp/diskless [release tag, e.g. sarge] [apt-ftp-or-http-mirror] /var/lib/diskless/default/base.tgz rm -rf /tmp/diskless
Now you are ready to create a new image:
For more information on creating see http://wiki.debian.net/index.cgi?DiskLess
Now some you should have a Debian image under /var/lib/diskless/default, however you still need to install some files in the diskless image:
chroot /var/lib/diskless/default apt-get install diskless-image-simple exit
Remember to configure the package to NOT use devfs. In case you missed it, here is what to do:
chroot /var/lib/diskless/default/root dpkg-reconfigure -p low diskless-image-simple <answer with the default except for what concerns devfs> exit
In order to create the individual directories for each node, run the script:
Make sure that the network configuration is correct in the diskless image (/var/lib/diskless/default/root/etc/network/interfaces):
auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp
Compiling a new kernel for the diskless nodes
On majorana, download the source code of the kernel which you installed. It should end up in /usr/src. Now use the config file of the kernel you installed on majorana (see IRIDIA cluster installing an OS on the servers) found in /root/.config to compile a kernel for the diskless nodes.
cd /usr/source/[kernel-dir] make menuconfig exit copy /root/.config . make menuconfig
At least four options should be changed, don't use modules, compile everything into the kernel:
- Initial ramdisk (initrd) should be disabled in device driver -> block devices)
- Mount NFS as root:
- Enable File systems -> Network File Systems -> NFS file system support
- Enable File systems -> Network File Systems -> Root file system on NFS
- Assign IP address at boot time:
- Enable Device drivers -> Networking Support -> Networking Options -> IP: kernel level autoconfiguration -> IP: DHCP support
- Compile GigaBit network driver into the kernel:
- Set: Device Drivers->Networking support->Ethernet (1000Mbit)-><*> Intel(R) PRO/1000 Gigabit
Furthermore, the kernel needs a slight change in the source code, so that the kernel requests an address via DHCP after during load:
In net/ipv4/ipconfig.c change:
int ic_enable __initdata = 0; to: int ic_enable __initdata = 1;
You are know ready to make a .deb package containing the kernel image:
make-kpkg --append-to-version -dc kernel_image kernel_headers
Now you are ready to install the new kernel in the diskless image. The following sequence of commands should do the trick:
cd /usr/src mv *deb /var/lib/diskless/defaut/root/root chroot /var/lib/diskless/default/root/ cd root dpkg -i *deb exit
Whola! The new kernel should be installed in the diskless image.
Remember to update the kernel dependend package in the diskless image if the new kernel is incompatibe with the old one (e.g. 2.6.x vs. 2.4.x). Upgrading the package modules-init-tools is a good idea.